HOW TO USE

• Usage
  Ideal for cabinets, tile, trim, doors, glass, metal, drywall, wood, masonry and paneling
• Prep
  Sand shiny surfaces. Surfaces should be clean, dull and dry. Remove loose rust and paint with wire brush or sandpaper.
• Application
  Ideal Conditions: Spray outdoors or in a well-ventilated area. Protect surrounding areas. Best results when air & surface temperatures are between 55°F (12°C) -- 75°F (24°C) and humidity is below 60%. NOTE: Applying outside of this range may impact finish. Priming: Shake can 1–2 minutes & during use. Test spray in an inconspicuous area for compatibility. Hold can 10"–12" from surface, spray in sweeping motion side to side with slight overlap. Apply multiple thin coats to avoid runs or drips. Recoat within 2 hours or after 48 hours.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 30 minute - 2 hour
  Recoat: (-2) hour - (+48) hour
• Clean-up & Disposal
  After Use: If spray button becomes clogged, wear eye protection and wipe off the button opening with a regionally compliant cleaner following manufacturer’s safety instructions — DO NOT stick pin in spray button opening. Wash hands after using. Dispose in accordance with local, provincial and federal regulations