.jpg)
Actual color may vary from on-screen representation.
Valspar® Pro-Hide® Interior PVA Primer
This primer effectively seals porous surfaces, preparing them for any architectural top coat. It can be used on properly prepared drywall & plaster. It is ideal for high-production spray application and dries to the touch in 1 hour. The fast-drying primer is specially formulated for the pro painter’s needs.
HOW TO USE
-
UsageProperly prepared interior drywall, wood and masonry surfaces.
-
PrepSurface should be clean, dry and dull. Glossy surfaces should be dulled. Thoroughly clean the surface and remove all dirt,dust, chalk, rust, grease, wax, mildew and peeling paint and allow to dry. See technical data page for additional surface prep.
-
ApplicationStir primer thoroughly before and during use. Apply with a premium-quality polyester brush, pad applicator, roller or airless sprayer. If applying by sprayer, back-roll or back-brush to work primer into the surface. Apply a liberal coat of primer uniformly, working well into the surface. Allow to dry at least 4 hours before applying a latex topcoat, overnight for oil topcoats.
-
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 1 hour - 4 hour Recoat: 4 hour
-
Clean-up & DisposalClean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for propermethod of disposal and recycling.
