HOW TO USE

• Usage
  For use over properly prepared wallboard, drywall and tape joints. Primer - Sealer is also suitable for spot priming patched area of previously painted walls, under latex or oil base paint.
• Prep
  Surfaces must be clean, dry and dull prior to application. Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Scrape and sand peeled or damaged paint. Sand glossy surfaces dull. All dust should be removed. Drywall:Fill cracks and holes with joint compound and sand smooth. Wood: Sand to a fresh surface. Patch imperfections with wood filler. Heavily stained areas, including tannin stains on wood, may require an appropriate stain-blocking primer. Plaster: Must be dry, fully cured and in goodcondition. Remove all chalky residue. Concrete/Masonry: Must be dry, fully cured and in good condition. Remove any powdery dust and efflorescence. Fill the pores of concrete block with a latex block filler. Soft concrete or masonry should be primed with a masonry conditioner.
• Application
  Stir thoroughly. Intermix containers to ensure uniform color. Apply with a premium-quality roller, polyester brush or airless sprayer. If applying by spray, back-roll or back-brush to work product into the surface. Apply a liberal coat of product uniformly, working well into the surface.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour - 4 hour
  Recoat: 2 hour - 4 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.