HOW TO USE

• Usage
  Properly prepared exterior masonry surfaces including cement, cinder block, stucco, concrete and brick. Do not use on glazed brick, floors or steps.
• Prep
  Apply paint to clean, sound surfaces. Large cracks, crumbling areas or water damage may need professional repair. New concrete or stucco must cure a month before applying a finish.
• Application
  Use a paint paddle to stir paint up from the bottom of the can. Intermix containers of the same color. Apply this product heavily to achieve best weatherproofing characteristics. No reduction necessary. Roller: Preferred method of application. For best results, use a quality 1/2" to 1-1⁄2" nap, synthetic roller cover. Always roll with a fully loaded wet roller — never dry roll. Do not stretch this coating. Be sure all low spots and gaps are covered. It is normal for painted surface to show roller marks. Airless Sprayer: Apply using 2300 PSI, .021" tip. Adjust pressure to suit your needs. Always follow spray application by back-rolling with a wet applicator. This will ensure that the paint is worked into the surface. Brush: Not recommended. Use only for small touch-ups.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 2 hour - 24 hour
  Recoat: 24 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.