Actual color may vary from on-screen representation.
Valspar® Protective Sealer Natural Look
This clear sealer resists weather, scuffs and provides a layer of protection while adding a low gloss to the appearance of the surface. It’s easy to apply, won’t yellow or peel and dries in 2 hours.
Opacity
Clear-Crystal Clear
1 Gallon, 5 Gallon
Coverage
75 ft²/gal - 150 ft²/gal
GET FREE SAME DAY DELIVERY
Get FREE same-day delivery from Lowe’s on all eligible paint and paint supplies when you order online by 2 pm!
HOW TO USE
-
UsageExterior aggregate, concrete, brick, pavers, masonry, mortar and flagstone. Do not use on garage floors.
-
PrepAll surfaces must be clean, dry and free of all loose, peeling paint or contaminants. Bare concrete: New concrete, masonry surfaces and mortar should be cured 60 days. Previously sealed surfaces: Clean with an all-purpose cleaner (TSP or substitute). Previously sealed surfaces must be porous and able to accept additional sealer. Test surface porosity before sealing: Avoid using this product on nonporous, sealed surfaces. To test, place a few drops of water on the surface. If water sinks in, the surface is porous enough to use this finish. If water remains on the surface, do not use.
-
ApplicationUse a roller or low-pressure, garden-type sprayer. While the first coat is still wet, apply a second coat to maximize protection. Allow 5–10 minutes for final penetration, then use a clean, dry cloth to wipe off all excess that did not soak into the surface. Do not pond or puddle this product.
-
Dry TimeDry Time @ 77 °F and 50 % Relative HumidityTo The Touch: 1 hour 1 hourRecoat: N/A
-
Clean-up & DisposalClean up with warm, soapy water.
