Features

This soft gloss enamel is formulated for maximum durability and performance in the demanding environments often found in kitchens and bathrooms. Infused with Advanced Crosslinking Technology, Valspar Ultra Premium® Kitchen

Where to Use

Properly prepared interior wall and ceiling surfaces including previously painted and primed plaster, wood, brick, drywall, cement and metal.

Coverage

Covers up to 400 sq. ft. (37.2 m²) per gallon. Thin only for spraying with up to 8 oz. of water per gallon of paint.

Clean Air Formula

According to the U.S. EPA, "volatile organic compounds (VOC's) are emitted as gases from certain solids or liquids. VOC's include a variety of chemicals, some of which may have short- and long-term adverse health effects. Concentrations of many VOC's are consistently higher indoors (up to ten times higher) than outdoors." In addition, VOC's are a contributing factor to ozone, a common air pollutant. Health risks depend upon how much is in the air and the frequency in which it is breathed. Learn more about low VOC and low odor.

Prepare the Surfaces

Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Patch cracks and spot prime. Dull glossy surfaces. Prime new wallboard with latex wall primer. Prime new wood with enamel undercoater or latex wall primer.

Dry Time

Dries to the touch in 30-60 minutes. Paint only when surface and air temperatures are 50-90°F (10-32°C). Recoat in 2-4 hours.

WARNING!

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.