Faux Finishes

Valspar Signature Colors Brilliant Metals

Brilliant Metals

Available Finishes:
(Click to download product details)


Quick Facts

  • Distinctive and Dramatic
  • A Vibrant Metallic Sheen
  • Available in quarts and gallons
  • Available at Lowe's

Related Products

Valspar Interior Signature Colors Paint

Signature Colors Paint

Valspar Signature Colors Brushed Suede Faux Finish

Brushed Suede

Features

Give your walls a distinctive and dramatic flair with Brilliant Metals glaze. This unique finish imparts a vibrant metallic sheen to liven up any room. Use on properly prepared wall and ceiling surfaces.

Coverage

One gallon covers approximately 400 sq. ft. (37.2 m²). Do not thin.

Preparing the Surface

Surface should be clean and dry. Scrape off loose paint and patch all holes, cracks, and indentations. Any imperfections and wall seams will be more visually apparent with a metallic paint.

Application

Apply a base coat of Signature Colors Interior Semi-Gloss Wall and Trim in a color similar to your chosen Brilliant Metals. Allow to dry completely. Stir paint thoroughly (note: paint may not have a completely uniform look). Brush a 2-3" border ("cut-in") around ceiling, floor, trim edges and corners. Note: Do not cut-in around the entire room at once as this can cause a banded appearance. Rather, brush out edges in sections. Fully saturate the Brilliant Metals roller cover. Working in 4' tall x 2' wide sections, roll the paint in up and down motions only (never side-to-side). Finish an entire vertical column of sections. When done, without adding more paint, finish with long, even strokes from ceiling to floor. Do not push on the roller. If lap lines are visible, reroll the line in a light, single ceiling-to-floor motion. Do not stretch this product. Allow to dry completely, at least 4 hours. Apply a second coat using the same rolling method as the first coat (no "cutting in" is necessary). Finish will appear uneven until dry.

Dry Time

Apply only when surface and air temperatures are 50-90°F (10-32°C). Dries to the touch in 1 hour. Wait 4 hours before recoating.

Lead Warning

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

VALSPAR PRODUCTS

Browse our selection of superior paints and primers designed for long-lasting beauty.